Ethernet/Ip; Leds On The Vision Sensor; Cabling - Baumer VeriSens ID Series Technical Documentation Manual

15.5.5 EtherNet/IP

15.5.5.1 LEDs on the Vision Sensor

LED Meaning
Indicates that the Vision Sensor is connected to a network.
LINK / ACT
Indicates that data is being transferred via Ethernet/IP.
NET RUN

15.5.5.2 Cabling

Follow the general rules for cabling Industrial Ethernet.
Use a shielded cable for data transfer. The maximum cable length is 100m. Make sure during cable
assembly that the cable shield is properly connected with the connector housing.
v2.11.0-B4
TM

On: Network connection established

Blinking: Data traffic active

Off: Ethernet/IP will not be used

Long blinking: Waiting for first cyclical connection

On: Cyclical connection active

Short blinking: Cyclical connection ended (waiting for next connection)
367/429
Technical Documentation
VeriSens
Baumer Optronic GmbH
Radeberg, Germany
®