Contour Comparison - Baumer VeriSens ID Series Technical Documentation Manual

Vision sensor

Hide thumbs Also See for VeriSens ID Series:

Table of Contents

12.3.2 Contour comparison

This feature check compares the contour of a taught-in object with the contour of the current object. In the

comparison, adjacent pixels are counted and correspondence is determined on the basis of switching points.

To use this feature check to its best effect, it is highly advisable to combine it with part location.

This feature check supports external Teach. Here all of the contours will be adopted in the model, but the

switching points remain unchanged.

The field of view must firstly be defined.

The corresponding object is then taught in.

Technical Documentation

Baumer Optronic GmbH

Radeberg, Germany