Baumer VeriSens ID Series Technical Documentation Manual page 198


The current result of the contrast feature check is displayed directly in the dialogue as the Contrast.
The switching points designated Min and Max are adjusted on the right hand side. A graphic display
is located in the middle, in which the positions of the switching points are displayed and where they
can be changed.

The right button is used to invert the result of the feature check.

If the feature check is to be corrected by the result of the part location, you can choose this option
here. External teach also makes it possible to retrain the feature check. Select the appropriate option
for this purpose.

Confirm your settings and return to the feature list with OK. Return to the feature list without making
any changes with Cancel.
This feature check has the following output values for the datagram at the process interface:
Output value
Result
Contrast
Reference area brightness Integer
v2.11.0-B4
Data type Description
Result of the feature check: "P" (Pass); "F" (Fail)
Integer
198/429
Technical Documentation
VeriSens
Baumer Optronic GmbH
Radeberg, Germany
®