Save To The Device - Baumer VeriSens ID Series Technical Documentation Manual

Vision sensor

Hide thumbs Also See for VeriSens ID Series:

Table of Contents

11.5 Save to the device...

This menu option is used to save a job created with the Application Suite to the device.

Enter a name for the job into the Job Name field and click on Save.

The job name including the file extension ".app" can be a maximum of 31 characters.

Encrypt with password: Activate this option if the file is to be saved in protected mode.

Activate when switching the device on: Activate this option if you want to activate the saved job when you

switch on the Vision Sensor.

This pin shows that the job is active at power on.

Technical Documentation

Baumer Optronic GmbH

Radeberg, Germany