10.3.4 Backup - restoring from the FTP server
Use this dialogue to transfer a device backup file from the FTP server to the device.
With this dialogue, you can transfer a complete device backup from the FTP server to the device. Device
settings, jobs and firmware are all restored.
Specify the storage path of the backup file or click on Browse. The file extension must be *.vsb .
NOTE
If you restore the factory settings of the Vision Sensor, all unsaved files will be lost!
Now transfer the selected settings and jobs to the device with OK. This process may take a few minutes.
(device dependant)
NOTE
If the device backup contains a calibrated lens distortion or shading correction, then the
backup will only be completed when the device has been switched to set-up mode after
recovery (Device configuration).
v2.11.0-B4
136/429
Technical Documentation
VeriSens
Baumer Optronic GmbH
Radeberg, Germany
®