Baumer VeriSens ID Series Technical Documentation Manual page 192


Current colour: The colour currently detected is displayed here. You can view the values for the
colour currently detected in various colour spaces (RGB, Lab, LCh, HSV).

Target colour: In this area, you can set the colour that should be searched for in each field of view.
Use the arrow to accept the colour currently detected as the target colour.
NOTE
We recommend that you calculate the target colour with a correct model piece. Entered
values may deviate from the model piece.
 Max. deviation: Here, you can set the maximum permissible colour deviation (in ΔE - distance
between two colour coordinates in the CIELab colour coordinate system). This change is displayed
to you in the CIELab colour coordinate system. The cover of the sphere represents the maximum
deviation.
v2.11.0-B4 192/429
Technical Documentation
VeriSens
Baumer Optronic GmbH
Radeberg, Germany
®