Correct Use - Baumer VeriSens ID Series Technical Documentation Manual

4 Correct Use

Depending on the device, the Vision Sensors in combination with the Application Suite software are used to
monitor and verify:

Completeness

Presence

Position

Correct position

Barcode and matrix code

Numbers and characters

Colour features
e.g. for objects passing the Vision Sensor on conveyor belts.
The vision sensors have a compact, industrial-grade housing and are designed exclusively for indoor use.
Use in wet areas is permissible under consideration of the IP protection class.
You can find an overview as to which Vision Sensors check which features under: Technical Data (Overview
of feature checks).
NOTE
The colour devices are suitable for tasks such as sorting objects by colour. They are not
suitable for measuring colours or determining colour deviations (ΔE).
NOTE
These devices are not suitable for use in the food sector as per EN 1672-2.
ATTENTION!
Only use the devices for its intended purpose! The guarantee becomes void in the case of
any application not described in the technical documentation!
If the equipment or device is used in a manner not specified by the manufacturer, the
protection provided by the equipment or device may be affected.
The device may only be connected to in-factory Ethernet networks and not be exposed to
Telecom Network Voltages (TNVs).
v2.11.0-B4 14/429
Technical Documentation
VeriSens
Baumer Optronic GmbH
Radeberg, Germany
®