Technical Data - Baumer OADR 20I6 Series User Manual

Technical data

Function
Technology
Measuring ranges MB
Resolution typical
Linear deviation (white ceramics)
Light source
Wavelength
Laser beam diameter (64xx)
Laser beam width (65xx)
Laser beam height (65xx)
Color sensitivity typ.
Suppression of mutual
interference
Temperature drift typical
Ambient light immunity
Measuring rate (depending on
object reflectivity)
Response time
Release time
Power on indicator
Alarm
Voltage supply range +Vs
Current consumption
Analog output
Load resistor at I-Out
Load resistor at U-Out
Alarm output
Alarm output type
Alarm output load current
Voltage drop at PNP
alarm output
Short circuit protection (analog I-
Out, analog U-Out, Alarm-Out)
Reverse polarity protection
Material of housing
Material of front optics
Material of light guide
1) 2)
* and * measured on white ceramic sheet
3)
* the response time depends on the reflectivity of the object
For objects with a reflectivity < 7% (OADM 20x2480/S14C), the response / release time is increased automatically
up to max. 2.8 ms.
*4)
Missed measurements up to 30 cycles will be suppressed. During this time the analog output stays on hold.
*5)
xx% of full scale measuring range / °C
6)
* maximum sunlight on a white measuring surface
BA_OADR20.doc
12.06.2017
OADR 20I6465/S14F
OADR 20I6565/S14F
30...130mm
0.005...0.06mm
< ±0.015... ±0.20mm
2...1mm
3...5mm
2...1mm
The synchronization input may be used for asynchronous operation
< ±0.03% of MB / °C
< 40 kLux
300....900us
36/40
OADR 20I6475/S14F
OADR 20I6575/S14F
Measuring sensor
Laser Triangulation
50.....300mm
0.01...0.33mm
< ±0.03... ±1.0mm
Laser diode red, pulsed
Red light 650nm
2mm
4...12mm
2.5mm
< 2 x the actual resolution
No active suppression
< ±0.03% of MB / °C
< 8 kLux
300....900us
< 2 x measuring rate
< 4 x measuring rate
yes, LED green
yes, LED red
12 ... 28 VDC
< 100 mA, (at +24V ~40mA)
4...20mA and 0...10V
< (+Vs - 6V) / 0.02A
>100k @ +Vs = 12V
>10k @ +Vs = 15...28V
yes (high signal beyond MB)
PNP
≤ 100 mA
max: < +Vs -(4.0V) @ 100mA
typ: +Vs -(2.4V) @ 100mA
yes
yes (supply only)
Stainless steel 1.4404
PMMA
PMMA
OADR 20I6485/S14F
OADR 20I6585/S14F
100...600mm
0.015...0.67mm
< ±0.05... ±2.0mm
2mm
5.5...21mm
2.5mm
< ±0.03% of MB / °C
< 10 kLux
300....2800us
.
Baumer
Frauenfeld, Switzerland