Baumer VeriSens ID Series Technical Documentation Manual page 63

Vision sensor

Hide thumbs Also See for VeriSens ID Series:

Table of Contents

Example: Feature comparison brightness with part location on contours

Part location on contours:

With this feature check, the position of an object is determined using contours.

Choose the shape of the area from which the contours are adopted.

Adopt the contours by pressing "Teach". A search is then made for the object in the entire image.

The match of the contours with the found object in the image is displayed here.

Using the appropriate switching points, set how good the match must be so that the object is found.

The button on the extreme right inverts the set point.

Technical Documentation

Baumer Optronic GmbH

Radeberg, Germany