Baumer VeriSens ID Series Technical Documentation Manual page 230

Vision sensor

Hide thumbs Also See for VeriSens ID Series:

Table of Contents

The Model editor tab can be used to edit the contours of the programmed object.

You can use these two buttons to enlarge or reduce the model.

You can gradually undo or redo the changes using these buttons.

With the displayed model, you can use the mouse to delete contours which clearly do not belong to

the reference object. Select the required tool strength to do this.

The reference position is by default the centre of the work area. The coordinates of this point can be output

for each located object via the process interface.

This tab can be used to amend the reference position. It can be moved horizontally and vertically and

Technical Documentation

Baumer Optronic GmbH

Radeberg, Germany