Baumer VeriSens ID Series Technical Documentation Manual page 204


Methods: Choose whether you want to count all areas or just the largest related areas.

Exclude cropped areas: Areas which touch the edge of the field of view are excluded from the
analysis. (only available for only the largest related areas).
Automatic brightness correction
In order to be independent of fluctuations in the ambient light, the device offers a means of automatically
correcting the brightness.
Use, do not carry reference area: Here, a field of view is defined as a reference area, for example by
attaching a white label to the edge of the conveyor belt (static). The brightness correction is now guided by
the brightness of this area.
Use, carry reference area: This function is only available in connection with part location. A field of view is
still used as the reference area. However, this is carried with the position correction. The brightness
correction is now guided by the brightness of this carried area.
v2.11.0-B4 204/429
Technical Documentation
VeriSens
Baumer Optronic GmbH
Radeberg, Germany
®