Honda Accord 2008 Manual page 2532

07/11/02 09:50:44 61TA0000_230_0088
27. Check for continuity between body ground and
audio unit connector C (16P) according to the t able.
＊０４
Is there continuity?
YES – Repair short to ground in the wire between
audio unit connector C (16P) and stereo amplifier
connector A (24P).■
NO – Replace the audio unit.■
・With navigation system (see page 23-109)
・Without navigation system (see page 23-111)
28. Turn the ignition switc h to LOCK (0).
29. Disconnect audio unit connecto r C (16P) and
stereo amplifier connector A ( 24P).
Audio unit
connector
C1
C2
C9
C10
AUDIO UNIT CONNECTOR C (16P)
Wire side of female terminals
30. Check for continuity between audio unit connector
C (16P) and stereo amplifier connector A (24P)
according to the table.
Wire
color
Audio unit
GRN
connector
BLK
WHT
C10
RED
AUDIO UNIT CONNECTOR C (16P)
−
ANC F
(WHT)
STEREO AMPLIFIER CONNECTOR A (24P)
Is there continuity?
YES – Go to step 31.
NO – Repair open in the wire between audio unit
connector C (16P) and stereo amplifier connector A
(24P).■
Stereo amplifier
connector
C9 A11
A22
Wire side of female terminals
＋
ANC F (RED)
−
ANC F (WHT)
ANC F ＋ (RED)
Wire side of female terminals
Wire
color
WHT
RED
＊０５
(cont'd)
23-87