Honda Accord 2008 Manual page 2562

07/11/02 09:51:56 61TA0000_230_0118
Crossover Network Control Unit Removal/Installation
Driver's Door Speaker Crossover Network
Control Unit
1. Remove the driver's dashboard lower cover
(see page 20-152).
2. Disconnect the connector (A), then remove the
driver's door speaker crossover network control
unit (B).
＊０１
3. Install the driver's door speaker crossover network
control unit in the reverse order of removal.
A
Front Passenger's Door Speaker Crossover
Network Control Unit
1. Remove the center console panel (see page 20-145),
then remove the audio pocket (see page 20-154).
2. Disconnect the connector (A), then remove the
passenger's door speaker crossover network
control unit (B).
B
B
3. Install the passenger's door speaker crossover
network control unit in the reverse order of
removal.
ＴＡ０８Ａ００Ｊ１０３１１１１７５９１ＫＤＡＴ００
＊０２
A
23-117