Honda Accord 2008 Manual page 2599

07/11/02 09:54:04 61TA0000_230_0155
Navigation System
System Description (cont'd)
Item
PIN
POI
Polygon
QWERTY
SCS service connector
Security Code
Touch Screen Buttons or Touch
Sensor
Tuning
Unverified Streets
Verified Streets
VP
VR
VSP
XM
Yaw Sensor
23-154
Personal Identification Number, a random 4 digit number created by the
customer to protect personal information.
Point Of Interest. These are the businesses, schools, etc. found under the places
option on the main menu.
Colored areas on the map screen denoting parks, schools, etc. See the
Navigation System Manual Driving to Your Destination for a list of the assigned
colors.
Keyboard layout resembling the typewriter keys. The keyboard layout can be
changed to an alphabetical layout in the Setup mode.
The service check signal 2-pin connector used to put the navigation system into
the diagnostic mode.
Code needed to activate the navigation system. You can get the security code
from the iN by entering the navigation unit serial number. You can find the
serial number on the diagnostic screens (Unit Check, Navi ECU) or on the
underside of the navigation unit.
Audio-HVAC display panel has 2 layers of clear film on the screen panel. If you
touch the screen panel, the film layers engage and the display unit detects the
touch point.
A continual update of internal navigation system scaling factors. See the
individual sensor tuning discussions under either System Description, or
System Diagnostic Mode (see page 23-172) in this manual.
These streets have not been verified for turn restrictions, one-way, etc. They
are shown in light brown on the map. You can enter address destinations in
these areas, but depending on your Unverified Routing choice in setup, voice
guidance may end at the last verified street closest to your destination.
These streets consist of the detailed metropolitan coverage areas, and all other
inter-town connection roads. These roads are shown in black on the map.
Vehicle Position. When in map mode, this circular icon shows the vehicle
position on the map. Touch this icon to show the latitude, longitude, and
elevation of your current position.
Voice Recognition. This allows voice control of many of the navigation
functions. The hardware consists of the microphone, voice control switch (Talk/
Back buttons), and the front speakers. See the overview for more information.
Vehicle Speed Pulse. This pulse signal coming from the PCM (via the CSS) is
used to update the Vehicle position on the map. These pulses do not indicate
direction (forward or backward). When in reverse, the navigation receives a
signal and directs the VP to move backwards on the map.
This device receives information from the XM satellites and passes XM audio
information to the audio unit. In addition, traffic information is sent to the
navigation unit (see AcuraLink).
This device is located in the navigation unit and senses the side-to-side twisting
force generated when the vehicle turns. See a detailed description of how this
sensor works in this manual.
Definition