Honda Accord 2008 Manual page 2533

07/11/02 09:50:45 61TA0000_230_0089
Audio System
Symptom Troubleshooting (cont'd)
31. Check for continuity between body ground and
audio unit connector C (16P) terminals No. 9 and
No. 10 individually.
＊０６
Is there continuity?
YES – Repair short to ground in the wire between
audio unit connector C (16P) and stereo amplifier
connector A (24P).■
NO – Go to step 32.
＊０７
32. Check for continuity between audio unit connector
C (16P) terminals No. 9 and No. 10.
Is there continuity?
YES – Repair short in the wire between audio unit
connector C (16P) and stereo amplifier connector A
(24P).■
NO – Replace the audio unit.■
・With navigation system (see page 23-109)
・Without navigation system (see page 23-111)
23-88
AUDIO UNIT CONNECTOR C (16P)
ANC F − ANC F ＋ (RED)
(WHT)
Wire side of female terminals
AUDIO UNIT CONNECTOR C (16P)
ANC F − ANC F ＋ (RED)
(WHT)
Wire side of female terminals
33. Turn the ignition switch to LOCK (0).
34. Disconnect audio unit connecto r C (16P) and
stereo amplifier connector A (24P).
35. Check for continuity between audio unit connector
C (16P) and stereo amplifier connector A (24P)
according to the table.
Audio unit Stereo amplifier
connector connector
C1
C2
AUDIO UNIT CONNECTOR C (16P)
Wire side of female terminals
ANC R −
ANC R ＋ (BLK)
(GRN)
ANC R
STEREO AMPLIFIER CONNECTOR A (24P)
Wire side of female terminals
Is there continuity?
YES – Go to step 36.
NO – Repair open in the wire between audio unit
connector C (16P) and stereo amplifier connector A
(24P).■
Wire
color
A12 GRN
A23 BLK
−
ANC R (GRN)
＋ (BLK)
＊０８