Honda Accord 2008 Manual page 2579

Hide thumbs Also See for Accord 2008:

Table of Contents

07/11/02 09:53:01 61TA0000_230_0135

Navigation System

General Troubleshooting Information (cont'd)

How to Check Error History

The Error History feature is to record intermittent

navigation issues that occur while the customer is

driving. Sometimes the customer complaint cannot be

duplicated. The error history may record the

information needed to diagnose the problem. To check

the error history:

1. Start the engine.

2. Press MAP/GUIDE MENU CANCEL buttons for 3

seconds, or connect the SCS service connector to

the navigation service connector located in the

trunk (see page 23-239).

3. When Select Diagnosis Items menu is displayed,

select Detail Information & Setting.

4. When the navigation unit has hard codes, the Error

History icon appears yellow when the Self

Diagnosis mode (System links) screen is displayed.

When no hard errors are stored, the icon appears

gray. To view the errors with their DTC codes,

select the error history icon.

System Links

Select Diagnosis Items

Self- Diagnosis Mode

(Navi will check internal function. connections, etc.

Perform this test with vehicle stopped and engine running.)

Detail Information & Setting

(Individual Diagnostic screens to confirm

a specific diagnostic screen.)

Press any icon if you want to see details.

5. Select Hard Error (Soft Error is for factory use only).

Error History

Chapters

Table of Contents