07/11/02 09:53:03 61TA0000_230_0140
Symptom
Display day/night mode does not
work
System locks up or freezes
constantly
Voice guidance cannot be heard, is
broken up, or there is static
Voice control does not work/
respond
Navigation cannot control HVAC by
voice command
Navigation cannot control XM radio
Navigation cannot control audio
system
Interface dial buttons do not work
Today's Destinations button is dim
and not selectable in the Enter
destination by screen (grayed-out)
Diagnostic procedure
Symptom Troubleshooting
(see page 23-231)
Symptom Troubleshooting
(see page 23-232)
Symptom Troubleshooting
(see page 23-226)
Symptom Troubleshooting
(see page 23-227)
Symptom Troubleshooting
(see page 23-230)
Symptom Troubleshooting
(see page 23-235)
Symptom Troubleshooting
(see page 23-235)
Symptom Troubleshooting
(see page 23-224)
The client has not entered a group
of locations for Today's Destinations.
This is normal. The button is only
selectable if the customer is using
this function.
Also check for
•
Navigation unit
•
Display brightness set to High in
day or night mode
•
Navigation display unit
•
Gauge control module (CAN)
•
Harness/fuses/switches
•
Navigation unit
•
The wrong color DVD or version is
installed
•
The DVD is damaged or dirty
•
Harness/fuses/switches
•
Volume or voice feedback setting
(see Owner's manual)
•
Navigation unit
•
Audio unit/amplifier
•
Harness/fuses/switches
Navigation unit microphone
harness/switches HandsFreeLink
control unit
•
The wrong color DVD or version is
installed
•
The DVD is damaged or dirty
•
Harness/fuses/switches
•
Wrong navigation unit (model
code)
•
The wrong color DVD or version is
installed
•
The DVD is damaged or dirty
•
Audio unit
•
XM receiver
•
Harness
•
Audio unit
•
Harness
•
The wrong color DVD or version is
installed
•
The DVD is damaged or dirty
•
Navigation unit
•
The wrong color DVD or version is
installed
•
The DVD is damaged or dirty
•
Navigation display unit
•
Interface dial
•
Harness/fuses/switches
See Owner's Manual
(cont'd)
23-139