Honda Accord 2008 Manual page 2495

07/11/02 09:48:38 61TA0000_230_0051
Audio System
Self-diagnostic Function (cont'd)
Speaker Check Mode
NOTE:
• Not all self-diagnostic functions appear on all models.
• There may be other self-diagnostic functions that are for factory use only.
1. Turn the ignition switch to ON (II). Turn the audio unit off.
2. Push and hold the No. 1 and No. 3 buttons. While holding the buttons, push the VOL PUSH PWR knob to on.
Release the buttons and the speaker check mode begins. A tone test should sound from one speaker.
NOTE: Make sure the volume is set to a normal or slightly higher than normal volume and set the balance and
fader to the center position.
3. Each time you press the SKIP button, the test moves to the next speaker in the order listed.
＊０８
Audio-HVAC Subdisplay
No. 1 button
＊２７
23-50
With navigation system
VOL PUSH
PWR knob
SKIP button
No. 3 button
1 CD type audio system
No. 1 button
No. 3 button
With premium, 6 CD type audio system
No. 1 button
No. 3 button SKIP button
Audio-HVAC Display
VOL PUSH
PWR knob
SKIP button
Audio-HVAC Display
VOL PUSH
PWR knob