Honda Accord 2008 Manual page 2497

07/11/02 09:48:39 61TA0000_230_0053
Audio System
Self-diagnostic Function (cont'd)
Active Noise Cancellation (ANC) System Check Mode
NOTE:
• Not all self-diagnostic functions appear on all models.
• There may be other self-diagnostic functions that are for factory use only.
• Only perform this test when you are guided from a troubleshooting procedure.
• The ANC function is not supported for 1CD models.
1. Turn the ignition switch to ON (II).
NOTE: Make sure the audio system is turned off.
2. Push and hold the No. 1 and No. 6 buttons. While holding the buttons, push the VOL PUSH PWR knob to ON.
＊０９
Audio-HVAC Subdisplay
3. Press the No. 1 button, the active noise cancellation (ANC) system check mode begins.
23-52
With navigation system
No. 1 button No. 6 button
With premium, 6 CD type audio system
VOL PUSH
PWR knob
No. 1 button
Audio-HVAC Display
No. 6 button
VOL PUSH PWR knob