Honda Accord 2008 Manual page 2540

07/11/02 09:50:48 61TA0000_230_0096
Error code: XM NO SIGNAL is displayed
NOTE:
• Check the vehicle battery condition first.
• Check the connectors for poor connections or loose
terminals.
1. Park the vehicle outside with a clear view of the
southern horizon.
2. Turn the ignition switch to ON (II).
3. Turn on the audio unit and select XM radio.
Does the X M radio receive a signal?
YES − Reception interference operation is
normal.
NO − Go to step 4.
4. Turn the ignition switch to LOCK (0).
5. Check the connection at XM antenna connector (1P)
and XM receiver connector B (1P).
Are the connectors connected?
YES − Go to step 6.
NO − Reconnect the connectors and recheck XM
radio operation. If the signal is restored, the system
is OK. If the signal is not restored go to step 6.
6. Turn the ignition switch to ON (II).
7. Measure the voltage between XM receiver
connector A (14P) terminal No. 1 and body ground.
XM RECEIVER CONNECTOR A (14P)
GA ＋ B (WHT)
Wire side of female terminals
Is there battery voltage?
−
YES Go to step 8.
NO − Repair open in the wire between audio unit
connector E (14P) terminal No. 1 and XM receiver
connector A (14P) terminal No. 1.
ＴＡ０８Ａ００Ｊ１０３００００００００ＦＡＡＴ２７
＊２３
(cont'd)
23-95