Honda Accord 2008 Manual page 2565

07/11/02 09:52:50 61TA0000_230_0121
Audio System
Speaker Test/Replacement (cont'd)
Rear Speaker
1. Remove the rear shelf (see page 20-119).
2. Remove the mounting bolt, then tilt the speaker
forward to release the front clips (A).
If you pull the speaker out too far from the
rear bulkhead, you will damage the lower
clips.
＊０７
A
3. Disconnect the 2P connector (B), and remove the
rear speaker.
4. Measure the resistance between the terminals
No. 1 and No. 2. There should be about 4
5. If the resistance is not as specified, replace the rear
speaker.
23-120
Subwoofer
1. Remove the rear shelf (see page 20-119).
2. Remove the four mounting bolts from the
subwoofer (A).
3. Disconnect the 2P connector (B), and remove the
subwoofer.
B
4. Measure the resistance between the terminals
No. 1 and No. 2. There should be about 2
5. If the resistance is not as specified, replace the
subwoofer.
.
A
B
＊０８
.