Honda Accord 2008 Manual page 2556

07/11/02 09:51:53 61TA0000_230_0112
Without Navigation System
SRS components are located in this area. Review the
SRS component locations (see page 24-21), and the
precautions and procedures (see page 24-23) before
doing repairs or service.
NOTE:
• Put on gloves to protect your hands.
• Take care not to scratch the dashboard and related
parts.
• Lay a shop towel under the parts when working on
them to protect the face panel from scratches or other
damage.
• Eject all the discs before remove the audio unit to
prevent damaging the CD/DVD player's load
mechanism.
• If you are replacing the audio unit, write down the
audio presets (if possible), then enter them into the
new audio unit.
1. Make sure you have anti-theft codes for the audio
system.
2. Remove the center console panel (see page 20-145)
and the dashboard center pocket (see page 20-154).
3. Remove the driver's inner dashboard trim
(see page 20-153), and passenger's dashboard trim
(see page 20-159).
4. Remove the self tapping screws and bolts, then pull
out the audio unit (A).
B
B
A
5. Disconnect the connectors (B), then remove the
audio unit.
ＴＡ０８ＡＮ０Ｊ１０３１１１１３１５１ＫＤＡＴ２０
＊０１
(cont'd)
23-111