Honda Accord 2008 Manual page 2538

07/11/02 09:50:48 61TA0000_230_0094
67. Check continuity between audio unit connector C
(16P) terminal No. 15 and body ground.
＊２４
Is there continuity?
YES – Go to step 68.
NO – Repair open in the wire between audio unit
connector C (16P) and ECM/PCM connector A
(49P).■
68. Remove the jumper wire.
69. Check continuity between audio unit connector C
＊２５
(16P) terminal No. 15 and body ground.
Is there continuity?
YES – Repair short to ground in the wire between
audio unit connector C (16P) and ECM/PCM
connector A (49P).■
NO – Update the ECM/PCM if it does not have the
latest soft t ware (see page 11-231) or substitute a
known-good ECM/PCM (see page 11-232).■
AUDIO UNIT CONNECTOR C (16P)
NEP (YEL)
Wire side of female terminals
AUDIO UNIT CONNECTOR C (16P)
NEP (YEL)
Wire side of female terminals
70. Turn the ignition switc h to LOCK (0).
71. Do the MICU input test (see page 22-138).
Is the B-CAN line between the audio unit and the
MICU OK?
YES – Replace the audio unit. ■
・With navigation system (see page 23-109)
・Without navigation system (see page 23-111)
NO – Repair open in the wire between audio unit
connector B (20P) and MICU connector P (20P).■
＊２６
23-93