Honda Accord 2008 Manual page 2557

07/11/02 09:51:53 61TA0000_230_0113
Audio System
Audio Unit Removal/Installation
(cont'd)
6. Remove the climate control unit (see page 21-165).
7. Remove the mounting screws and bolts from the
audio unit (A), then remove the audio unit from the
audio switch panel (B).
＊０２
8. Install the audio unit in the reverse order of
removal, and note these items:
• Make sure all the connectors and the antenna
lead are secure.
• Enter the anti-theft codes for the audio system.
• Set the clock.
• Give the new anti-theft codes to the customer.
23-112 23-112
A
B
Audio Switch Panel Removal/
Installation
With Navigation System
NOTE:
• Put on gloves to protect your hands.
• Take care not to scratch the dashboard and related
parts.
• Lay a workshop towel under the parts when working
on them to protect the face panel from scratches or
other damage.
• Do not work in a dusty or dirty place.
• Discharge static electricity from your body before and
during the work.
• Do not touch the circuit board with your bare hands.
• Do not work with dirty hands.
• Be careful not no fold the flat plate cable.
• Do not touch the terminal connector of the flat plate
cable with your bare hands. (If you have touched it,
wipe it off thoroughly.)
1. Remove the audio unit (see page 23-109).
2. Remove the interface dial (see page 23-241).
3. Remove the mounting screws and bolts from the
audio unit (A), then remove the audio unit from the
audio switch panel (B).
A
4. Install the audio switch panel in the reverse order
of removal.
ＴＡ０８ＡＮ１Ｊ１０３１１１１３１４３ＫＤＡＴ０１
＊０１
B