Fitting The Attachments Of Irbdp Mh2 Ue And Irbdp Sw2 Ue - ABB DressPack IRB 6640 Product Manual

2 Installation

2.2.4 Fitting the attachments of IRBDP MH2 UE and IRBDP SW2 UE

2.2.4 Fitting the attachments of IRBDP MH2 UE and IRBDP SW2 UE
Location of the attachments of IRBDP MH2 UE and IRBDP SW2 UE
The location of the attachments of the cable packages IRBDP MH2 UE and SW2
UE is shown in the figure.
xx0700000324
A
B
C
D
Continues on next page
58
Note
This section is also valid for how to fit the attachments on the upper end of the
cable package IRBDP SW2 CE. Only difference is that the connection plate
between upper and lower cable package does not exist since the harness is
continuous.
Strap and strap holder
Tension arm unit
Ball joint housing (tension arm)
Process cable package
© Copyright 2007-2018 ABB. All rights reserved.
Product manual - DressPack/SpotPack IRB 6640
3HAC028638-001 Revision: K