Water & Air Unit - ABB DressPack IRB 6640 Product Manual

2.6 Water & Air unit
2.6.1 Installation of Water and air unit
Location of Water and air unit, type S
The Water and air unit type S is located as shown in the figure below. The figure
shows the Water and air unit fitted on IRB 6620, but the principle is the same the
other models.
xx0600003205
A
B
C
D
Do not tighten the brass couplings for water
and air with excessive force.
Product manual - DressPack/SpotPack IRB 6640
3HAC028638-001 Revision: K
Water and air unit, type S
Attachment screws M6x8 quality 8.8-A2F, Water in and water return unit (6 pcs)
Attachment plate
Attachment screws M6x8 quality 8.8-A2F, Water and air unit (4 pcs)
CAUTION
© Copyright 2007-2018 ABB. All rights reserved.
2.6.1 Installation of Water and air unit
Tightening torque, brass couplings 1/2": 31
Nm
Tightening torque, brass couplings 3/8": 17
Nm
Continues on next page
2 Installation
175