ABB DressPack IRB 6640 Product Manual page 176

2 Installation
2.6.1 Installation of Water and air unit
Continued
Location of Water and air unit, type Sb (SpotPack Basic)
The Water and air unit type Sb is located as shown in the figure below. The figure
shows the water and air unit fitted on IRB 6600, but the principle is the same for
the other models.
xx0800000115
A
B
C
D
E
PROC 1
PROC 2
PROC 3
PROC 4
Do not tighten the brass couplings for water
and air with excessive force.
General technical data
The table below shows technical data of the water and air pressure:
Parameter
Water operating pressure
Air operating pressure
The table below shows technical data for water and air quality:
Parameter
Water quality
Continues on next page
176
Water and air unit, type Sb
Connection box
Bracket, connection box
Bracket right (Bracket left on other side. Not shown here)
Clamp holder with plastic clamp
PROC 1 on robot base
PROC 2 on robot base
PROC 3 on robot base
PROC 4 on robot base (option)
CAUTION
© Copyright 2007-2018 ABB. All rights reserved.
Tightening torque, brass couplings 1/2": 31
Nm
Tightening torque, brass couplings 3/8": 17
Nm
Value
Max. 0.6 MPa / 87 PSI
Max. 1.0 MPa / 145 PSI
Value
Normal filtered industrial water quality, 80 to
100 mesh.
Product manual - DressPack/SpotPack IRB 6640
3HAC028638-001 Revision: K