Fitting The Connector For Incoming Mains - ABB OmniCore V250XT Type B Product Manual

3 Installation and commissioning

3.5.5 Fitting the connector for incoming mains

3.5.5 Fitting the connector for incoming mains
General
This section describes how to manufacture a cable for connecting the main power
to the controller.
Detailed view
xx2100001257
A
B
C
D
E
Specifications
The following describes the cable requirements for the incoming mains connection
to the OmniCore V250XT Type B controller.
Component
Cable type
Cable area
Protective earth
Included parts
The following parts are included in the delivery.
Part
Connector kit
Continues on next page
82
Description
Cable gland
O-ring
Hood, EMC
Locking lever (x2)
Connector insert
Description
Flexible oil resistant rubber
3G x 6 mm
PE1 and PE2 points on X0 (incoming mains connector).
© Copyright 2023-2023 ABB. All rights reserved.
2
or AWG10
Order number
3HAC075871-001
Product manual - OmniCore V250XT Type B
Quantity
1
3HAC087112-001 Revision: A