ABB DressPack IRB 6640 Product Manual page 97

6
7
Product manual - DressPack/SpotPack IRB 6640
3HAC028638-001 Revision: K
2.2.8 Fitting the cable packages IRBDP MH2 LE and IRBDP SW2 LE
Action
Remove the part of the backplate where
process and customer plates are supposed
to be fitted. Hit the removable part with a
plastic mallet or similar without damaging
other parts of the backplate.
Fit process and customer plates.
Fit the adapter complete to the customer
plate with the two attachment screws.
© Copyright 2007-2018 ABB. All rights reserved.
2 Installation
Note
Shown in the figure Location of lower arm
cable package on page 93.
xx0700000404
Parts:
• A: Removable part of backplate
• B: Holes for attachment screws
Note
Only needed when the DressPack cable
package is fitted for the first time.
xx0300000195
Parts:
• A: Adapter complete
• B: Attachment screws M6x16
quality 8.8-A2F (2 pcs)
Continues on next page
Continued
97