2 Installation
2.6.1 Installation of Water and air unit
Continued
Item in figure
F
G
Do not tighten the brass couplings for water
and air with excessive force.
Connections to Water and Air unit, type Sb
The figure shows the connections at the robot base.
xx0800000123
A
B
C
D
E
F
G
The figure shows the connections on the Water and air unit.
Do not tighten the brass couplings for water
and air with excessive force.
Continues on next page
182
Connect to:
PROC3 on robot base
PROC4 on robot base
Note! Only the position of this
connection is shown in the figure!
CAUTION
Customer plate
R1.PROC 1
R1.PROC 2
R1.PROC 3
R1.PROC 4
WELD
R1.CP/CS
CAUTION
© Copyright 2007-2018 ABB. All rights reserved.
Function:
Water return circuit
Depending on option selected:
•
Second water return
•
Regulated air
Tightening torque, brass couplings 1/2":
31Nm
Tightening torque, brass couplings 3/8":
17Nm
Tightening torque, brass couplings 1/2":
31Nm
Tightening torque, brass couplings 3/8":
17Nm
Product manual - DressPack/SpotPack IRB 6640
3HAC028638-001 Revision: K