ABB DressPack IRB 6640 Product Manual page 298

4 Repair
4.2.14 Repair of process cable package
Continued
17
18
19
20
21
22
23
298
Action
CAUTION
Verify that hoses can withstand 500 N
static load without leading to any motion
between hoses and rubber retainer relative.
Remove plastic film at the tool end (avoid
grease on the pins) and assemble the
connectors
Check that all cables are connected accord-
ing to circuit diagram and use the proper
tools
Check that the strain relief for the cables
are correct.
Mount the fittings on the hoses and double
check for leakage.
If protective sleeves has been fitted, refit
them at the same position as before.
The package is ready for assembly on the
robot.
© Copyright 2007-2018 ABB. All rights reserved.
Note
Use recommended insertion tool, see
Toolkit cables.
See Toolkits, DressPack/SpotPack on
page 335
Product manual - DressPack/SpotPack IRB 6640
3HAC028638-001 Revision: K