ABB DressPack IRB 6640 Product Manual page 127

7
8
9
Product manual - DressPack/SpotPack IRB 6640
3HAC028638-001 Revision: K
Action
Arrange cable and hose in a way that they
form a smooth bend over and close to the
upper arm, between the brackets on either
side.
Push the cables and hose through the pro-
tection hose and fit them in the gripping
clamp on the bracket left.
Fit a gripping clamp at the other end of the
protection hose.
© Copyright 2007-2018 ABB. All rights reserved.
2.2.12 Fitting the cable package IRBDP MH3 UE
Note
xx0700000386
Parts:
• A: Bracket, left
• B: Arranged cables and hose
• C: Bracket, right
• D: Upper arm
Shown in the figure above!
Shown in the figure
2 Installation
Continued
Location on page 123.
127