ABB DressPack IRB 6640 Product Manual page 289

2
3
Refitting step 4 - Cable package
Use this procedure to refit the cable package.
1
2
Product manual - DressPack/SpotPack IRB 6640
3HAC028638-001 Revision: K
4.2.12 Replacing the protection hose - IRBDP SW6 UI and MH6 UI - Upper arm
Action
Secure the cable and hose retainer with the
hose clamp.
Fit the clamp jaw.
Action
Refit the cable package on the upper arm.
DANGER
Make sure all safety requirements are met
when performing the first test run. These
are further detailed in the section
run may cause injury or damage on
page 27.
© Copyright 2007-2018 ABB. All rights reserved.
Note
xx1200000159
xx1200000102
Note
Fitting the cable package IRBDP SW6 &
MH6 UI/LE, Lean ID on page 133
First test
4 Repair
Continued
289