5
6
7
Product manual - DressPack/SpotPack IRB 6640
3HAC028638-001 Revision: K
2.2.9 Fitting the cable packages IRBDP MH2 UE and IRBDP SW2 UE
Action
Connect all cable and hoses to the lower arm
plate in the following order:
•
Fit the weld connector
•
Fit the cable package in the gripping
clamp
•
Tighten the weld connector
•
Fit and tighten the cable connectors
•
Fit and tighten the hose connectors
CAUTION
Do not tighten the brass couplings for water and
air with excessive force.
Note
Do not secure the cable package in the gripping
clamp on the lower arm plate, until cables and
hoses are connected.
Fit the strap holder on a ½" hose.
The locking device on the strap holder shall be
placed outwards in relation to the rest of the
cables and hoses.
© Copyright 2007-2018 ABB. All rights reserved.
2 Installation
Note
Tightening torque, brass couplings
1/2": 31Nm
Tightening torque, brass couplings
3/8": 17Nm
xx0500001439
Parts:
•
A: Cable and hose connections
on the lower arm plate
•
B: Gripping clamp
xx0700000337
Parts:
•
A: Strap holder
Continues on next page
Continued
105