ABB DressPack IRB 6640 Product Manual page 48

2 Installation
2.2.2 Installation activities
Continued
K
L
M
N
O
P
xx0800000127
Procedures, DressPack continuous cable package
The following procedures are valid for DressPack cable packages without division
point (continuous).
1
2
3
4
5
Continues on next page
48
Connection plate
Cable package IRBDP SW2 UE & IRBDP MH2 UE
Cable package IRBDP SW2 CE
Cable package IRBDP SW6 & MH 6 LE
Connection plate
Cable package IRBDP SW6 & MH 6 UI
SpotPack Basic cable package IRBDP SW5 CE (The figure shows the cable
package fitted on IRB 6640)
For information about:
Fitting the attachments of the IRBDP SW2
CE, lower end.
Fitting the attachments of the IRBDP SW2
CE, upper end.
Fitting the cable package IRBDP SW2 CE.
Inspecting the lower arm equipment after
installation.
Inspecting the upper arm equipment after
installation.
© Copyright 2007-2018 ABB. All rights reserved.
See Installation activities on page
See Fitting the attachments of IRBDP MH2
LE and IRBDP SW2 LE on page
See Fitting the attachments of IRBDP MH2
UE and IRBDP SW2 UE on page
See Fitting the cable package IRBDP SW2
CE on page 107.
This is detailed in section
DressPack lower arm on page
This is detailed in section
DressPack upper arm on page
Product manual - DressPack/SpotPack IRB 6640
3HAC028638-001 Revision: K
47.
51.
58.
Inspection,
145.
Inspection,
146.