Replacement Of Slide Sleeves - ABB DressPack IRB 6640 Product Manual

4.3.2 Replacement of slide sleeves

Location of slide sleeves
The slide sleeves are located as shown in the figure below.
Replacement of slide sleeves is possible to be performed without removing the
DressPack from the robot. However replacement may also be performed on a work
bench. How to remove the DressPack from the robot is detailed in section
the cable packages IRBDP MH2 UE and IRBDP SW2 UE on page 229
the cable package IRBDP SW5 CE (SpotPack Basic) on page
Figure shows IRB 6600.
xx0500001533
A
B
Product manual - DressPack/SpotPack IRB 6640
3HAC028638-001 Revision: K
Note
This section is not applicable to cable packages IRBDP SW6 UI and IRBDP MH6
UI.
Slide sleeves
Hose reinforcement
© Copyright 2007-2018 ABB. All rights reserved.
4.3.2 Replacement of slide sleeves
243.
Continues on next page
4 Repair
Replacing
or Replacing
307