ABB DressPack IRB 6640 Product Manual page 85

7
8
9
Product manual - DressPack/SpotPack IRB 6640
3HAC028638-001 Revision: K
2.2.7 Fitting the attachments of IRBDP SW6 & MH6 UI/LE (Lean ID)
Action
Fit the adjustable A6 bracket 1(2).
Lock screws with locking liquid (Loctite
243).
Fit the adjustable A6 bracket 2(2).
Normally this adjustable bracket shall be
locked in its most forward position. How to
do that is described in the steps followed.
Note
If it is not possible to lock the adjustable
bracket 2(2) in its most forward position by
following the instructions below, then move
the athe bracket 2(2) as far forward as
possible. If this is the case the screw
shown in the figure is not needed and shall
not be used!
© Copyright 2007-2018 ABB. All rights reserved.
2 Installation
Note
xx1200000037
Attachment screws:
M8x16 quality 8.8-A2F (2 pcs)
xx1200000157
Continues on next page
Continued
85