ABB DressPack IRB 6640 Product Manual page 113

10
11
Product manual - DressPack/SpotPack IRB 6640
3HAC028638-001 Revision: K
Action
Remove the part of the backplate where pro-
cess and customer plates are supposed to
be fitted. Hit the removable part with a plastic
mallet or similar without damaging other parts
of the backplate.
Fit process and customer plates.
Fit the adapter complete to the customer
plate with its two attachment screws.
Screws are supplied with the kit.
© Copyright 2007-2018 ABB. All rights reserved.
2.2.10 Fitting the cable package IRBDP SW2 CE
Note
Shown in the figure
package - IRBDP SW2 CE on page
xx0700000404
Parts:
• A: Removable part of backplate
• B: Holes for attachment screws
Note
Only needed when the DressPack cable
package is fitted for the first time.
xx0300000195
Parts:
• A: Adapter complete
• B: Attachment screws M6x16
quality 8.8-A2F (2 pcs)
2 Installation
Continued
Location of cable
107.
Continues on next page
113