Fitting The Attachments Of Irbdp Mh2 Le And Irbdp Sw2 Le - ABB DressPack IRB 6640 Product Manual

2.2.3 Fitting the attachments of IRBDP MH2 LE and IRBDP SW2 LE

Location of the attachments of IRBDP MH2 LE and IRBDP SW2 LE
The location of the attachments of the cable packages IRBDP MH2 LE and SW2
LE are shown in the figure.
xx0700000323
A
B
C
D
E
F
G
H
Product manual - DressPack/SpotPack IRB 6640
3HAC028638-001 Revision: K
2.2.3 Fitting the attachments of IRBDP MH2 LE and IRBDP SW2 LE
Note
This section is also valid for how to fit the attachments on the lower end of the
cable package IRBDP SW2 CE. Only difference is that the connection plate
between upper and lower cable package does not exist since the harness is
continuous.
Strap
Velcro strap
Bracket, axis 1
Lower arm plate
Connection plate (part of process cable package)
Gripping clamps
Process cable package
Side bracket, balancing device (incl. lower bracket)
© Copyright 2007-2018 ABB. All rights reserved.
2 Installation
Continues on next page
51