Installation Of Irbdp Mh2 Le And Irbdp Sw2 Le; Fitting The Attachments Of Irbdp Mh2 Le And Irbdp Sw2 Le - ABB DressPack IRB6650S Product Manual

2.2.6 Installation of IRBDP MH2 LE and IRBDP SW2 LE

2.2.6.1 Fitting the attachments of IRBDP MH2 LE and IRBDP SW2 LE

Location of the attachments of IRBDP MH2 LE and IRBDP SW2 LE
The location of the attachments of the cable packages IRBDP MH2 LE and SW2
LE are shown in the figure.
Figure shows IRB 7600.
xx0800000151
A
B
C
D
E
F
G
H
Product manual - DressPack/SpotPack IRB 6650S
3HAC055424-001 Revision: C
2.2.6.1 Fitting the attachments of IRBDP MH2 LE and IRBDP SW2 LE
Note
This section is also valid for how to fit the attachments on the lower end of the
cable package IRBDP SW2 CE. Only difference is that the connection plate
between upper and lower cable package does not exist since the harness is
continuous.
Attachment, balancing device
Turn plate
Gripping clamp
Process cable package, lower arm
Gripping clamp
Lower arm plate
Connection plate
Customer plate
© Copyright 2004-2018 ABB. All rights reserved.
2 Installation
Continues on next page
75