Product Name Principles - ABB DressPack IRB6650S Product Manual

Product name principles

General
The different robots have a wide range of options. In many cases the option name
gives a good explanation of its content. In some cases there is a need to add more
information in the product name in order to clearly show a certain variant and to
avoid misunderstandings. Hence a complementary naming standard is used.
The family name of the options is DressPack (that is customer cables and hoses
from the controller to the robot's axis 6, divided in different sections).
DressPack parts
DressPack parts that are assembled on the robot are called:
Main application
The DressPack has been prepared for two main applications:
Product name
MH
SW
Generations
The different generations of a DressPack is indicated with a generation number.
The number indicates the different design of each generation. (Some generations
might not be available since it has been phased out).
Sections
The DressPack on the robot is supplied in different sections:
Product name
L
U
C
Routing
The DressPack can be routed in different ways:
Product name
I
E
Product manual - DressPack/SpotPack IRB 6650S
3HAC055424-001 Revision: C
• IRBDP (IRB DressPack)
Application
Material handling
Spot welding
• 1, 2, 3 etc
Section
Lower DressPack section
Upper DressPack section
Continuous DressPack
(DressPack without an intermediate connection point)
Routing
Integrated DressPack
The main parts are integrated within the robot structure.
External DressPack
The main parts are routed outside, on the robot structure.
© Copyright 2004-2018 ABB. All rights reserved.
Product name principles
Continues on next page
13