ABB DressPack IRB6650S Product Manual page 148

2 Installation
2.2.10.2 Fitting the cable package IRBDP MH LI
Continued
Required tools and equipment
Equipment
Standard toolkit
Required consumable
Consumable
Locking liquid
Cable grease
Fitting the cable package IRBDP MH LI
Connect the cable package at the base
1
2
3
4
Continues on next page
148
Action
DANGER
Turn off all:
• electric power supply
• hydraulic pressure supply
• air pressure supply
to the robot, before entering the robot working
area.
CAUTION
The cable package is sensitive to mechanical
damage. Handle it with care in order to avoid
damaging the cabling or the connectors.
Remove the rear cover plate.
Remove the part of the backplate where the cus-
tomer plate is to be fitted. Hit the removable part
carefully with a plastic mallet.
Note
Only needed when the DressPack cable package
is fitted for the first time.
© Copyright 2004-2018 ABB. All rights reserved.
Article number Note
Content is defined in section
Standard toolkit on page
Article number Note
3HAB7116-1 Loctite 243, for locking screws.
Note
xx1500002963
xx1500002964
Product manual - DressPack/SpotPack IRB 6650S
355.
3HAC055424-001 Revision: C