Dresspack Floor; Installation Of Dresspack Floor - ABB DressPack IRB6650S Product Manual

2 Installation

2.5.1 Installation of DressPack floor

2.5 DressPack floor

2.5.1 Installation of DressPack floor
Configuration and connections of DressPack floor
The DressPack floor is made up of several components. Some of these components
are specific to DressPack / SpotPack application, while others are used also in
other applications.
The configuration of the components differs between different application types.
The connection of the water and air unit also differs whether option 782-13 Bosch
MFDC Profinet is chosen or not.
Types of application
Some typical applications are specified below:
Type of ap-
plication
H
S
HS
Se
HSe
Connection points
The cables and connections points between the components are all detailed and
illustrated in the circuit diagram for the current application. See references to the
circuit diagrams in
Required equipment
Equipment, etc.
DressPack floor
Standard Toolkit,
DressPack/SpotPack
Reference documents
Document
Circuit diagram - DressPack IRB
6640, IRB 6650S, IRB 7600
Continues on next page
188
Description
Pneumatic gun
Material handling and
pneumatic gun
Servo gun
Material handling and
servo gun
Reference documents on page
Article number
For spare part number
see chapter:
• Spare parts on
page 359.
3HAC17290-7
Document number
3HAC026209-001
© Copyright 2004-2018 ABB. All rights reserved.
Example of included components
Robot, single cabinet controller
Robot, single cabinet controller, water and air unit
Robot, single cabinet controller, spot welding cab-
inet, water and air unit, pedestal gun
Robot, single cabinet controller, spot welding cab-
inet, water and air unit
Robot, single cabinet controller, spot welding cab-
inet, water and air unit, pedestal gun
188.
Note
A number of versions are available.
The contents are defined in section
Toolkits, DressPack/SpotPack on page
Note
Product manual - DressPack/SpotPack IRB 6650S
3HAC055424-001 Revision: C
355.