ABB DressPack IRB6650S Product Manual page 150

2 Installation
2.2.10.2 Fitting the cable package IRBDP MH LI
Continued
9
10
11
12
Continues on next page
150
Action
Fit the R1.CP/CS cable to the customer plate.
Secure the R1.CP/CS connector.
Connect the rest of the cable and hose connectors
to the customer plate.
CAUTION
Do not tighten the brass couplings for water and
air with excessive force.
CAUTION
Make sure that no cables or hoses are twisted or
strained. Reroute if necessary.
Refit the rear cover plate.
© Copyright 2004-2018 ABB. All rights reserved.
Note
xx1400001142
xx1400001143
M6x25 A2-70 (2 pcs)
Tightening torque, brass couplings
1/2": 31 Nm
Tightening torque, brass couplings
3/8": 17 Nm
xx1200000088
xx1500002969
Product manual - DressPack/SpotPack IRB 6650S
3HAC055424-001 Revision: C