ABB DressPack IRB6650S Product Manual page 303

Required equipment
The following equipment are required for replacement of protective sleeves.
Equipment
Protective sleeve
Standard toolkit, DressPack/SpotPack
Other tools and procedures may be
required. See references to these
procedures in the step-by-step instruc-
tions below.
Procedures
The procedure below details how to change or move the protective sleeves.
1
2
Product manual - DressPack/SpotPack IRB 6650S
3HAC055424-001 Revision: C
Action
DANGER
Turn off all:
• electric power supply
• hydraulic pressure supply
• air pressure supply
to the robot, before entering the robot
working area.
CAUTION
The cable package is sensitive to mech-
anical damage. They must be handled
with care, especially the connectors, in
order to avoid damaging them.
© Copyright 2004-2018 ABB. All rights reserved.
4.2.14 Replacement of protective sleeves
Art. no. Note
For spare part num-
ber see:
• Spare parts
on page 359.
For spare part num-
ber see
chapterSpare parts
for cable package
on page 366
3HAC17290-7 The contents are defined in
section
DressPack/SpotPack on
page
These procedures include ref-
erences to the tools required.
Note
Continues on next page
4 Repair
Continued
Toolkits,
355.
303