ABB DressPack IRB6650S Product Manual page 96

2 Installation
2.2.7.2 Fitting the cable packages IRBDP MH2 UE and IRBDP SW2 UE
Continued
5
6
96
Action
Connect all cable and hoses to the lower arm
plate in the following order:
• Fit the weld connector
• Fit the cable package in the gripping
clamp
• Tighten the weld connector
• Fit and tighten the cable connectors
• Fit and tighten the hose connectors
CAUTION
Do not tighten the brass couplings for water and
air with excessive force.
Note
Do not secure the cable package in the gripping
clamp on the lower arm plate, until cables and
hoses are connected.
Secure the cable package with the gripping
clamp on the lower arm plate.
© Copyright 2004-2018 ABB. All rights reserved.
Note
Tightening torque, brass couplings
1/2": 31Nm
Tightening torque, brass couplings
3/8": 17Nm
xx0500001439
Parts:
• A: Cable and hose connections
on the lower arm plate
• B: Gripping clamp
A
xx0500001440
Parts:
• A: Gripping clamp
Product manual - DressPack/SpotPack IRB 6650S
3HAC055424-001 Revision: C