ABB DressPack IRB6650S Product Manual page 115

N
Required equipment
Equipment
Cable package IRBDP SW5 CE (SpotPack
Basic)
Required tools
Equipment
Standard toolkit, DressPack/Spot-
Pack
Other tools and procedures may
be required. See references to
these procedures in the step-by-
step instructions below.
Procedure
Use this procedure to fit the cable package IRBDP SW5 CE (SpotPack Basic).
1
2
Product manual - DressPack/SpotPack IRB 6650S
3HAC055424-001 Revision: C
2.2.8.2 Fitting the cable package IRBDP SW5 CE (SpotPack Basic)
Clamp holder with plastic clamp
Action
DANGER
Turn off all:
• electric power supply
• hydraulic pressure supply
• air pressure supply
to the robot, before entering the robot
working area.
CAUTION
The cable package is sensitive to mechan-
ical damage. They must be handled with
care, especially the connectors, in order to
avoid damaging them.
© Copyright 2004-2018 ABB. All rights reserved.
Art. no.
For spare part
number see
chapter:
• Spare
parts on
page 359.
Article number Note
3HAC17290-7 The contents are defined in sec-
tion
Pack on page
These procedures include refer-
ences to the tools required.
Note
2 Installation
Continued
Note
A number of variants are
available.
Toolkits, DressPack/Spot-
355.
Continues on next page
115