ABB DressPack IRB6650S Product Manual page 103

8
9
10
Product manual - DressPack/SpotPack IRB 6650S
3HAC055424-001 Revision: C
Action
Fit the adapter complete to the customer
plate with its two attachment screws.
Screws are supplied with the kit.
Run the cables down through the center hole
of gearbox axis 1 in the following order:
• Signal cable
• Hoses, slightly to the right of the signal
cable
Check:
• Check that signal cable and hoses do
not end up between the motor cables
• Check that cables and hoses do no
cross each other.
Attach the cable and hose clamp with the at-
tachment screws M6x16 quality 8.8-A2F (2
pcs).
Lock the screws with locking liquid.
Screws are supplied with the kit.
© Copyright 2004-2018 ABB. All rights reserved.
2.2.7.3 Fitting the cable package IRBDP SW2 CE
Note
xx0300000195
Parts:
• A: Adapter complete
• B: Attachment screws M6x16
quality 8.8-A2F (2 pcs)
xx0500001421
Parts:
• A: Cable and hose clamp
• B: Attachment screws (2 pcs)
Art. no. is specified in section
equipment on page
2 Installation
Continued
B
A
Required
99.
Continues on next page
103