ABB DressPack IRB6650S Product Manual page 118

2 Installation
2.2.8.2 Fitting the cable package IRBDP SW5 CE (SpotPack Basic)
Continued
9
10
11
12
13
14
15
16
118
Action
Fit the process cable package to the water
and air unit.
CAUTION
Do not tighten the brass couplings for water
and air with excessive force.
Fit the process cable package to the turn
plate with the spiral hose clamp.
Secure the process cable package to the
attachment balancing cylinder with the vel-
cro straps.
Fit the process cable package to the grip-
ping clamp on the lower arm plate.
Secure the process cable package with the
velcro strap to the lower arm plate.
Fit the process cable package to the grip-
ping clamp on the adjustable bracket.
Fit the process cable package in the ball
joint housing on the adjustable bracket.
Fit the process cable package on the ball
joint housing on the process cable support
axis 6.
© Copyright 2004-2018 ABB. All rights reserved.
Note
Tightening torque, brass couplings 1/2":
31Nm
Tightening torque, brass couplings 3/8":
17Nm
xx0800000083
Parts:
• A: Water and air unit
Shown in the figure
package on page
Shown in the figure
package on page
Shown in the figure
package on page
Shown in the figure
package on page
Shown in the figure
package on page
Shown in the figure
package on page
Shown in the figure
package on page
Product manual - DressPack/SpotPack IRB 6650S
3HAC055424-001 Revision: C
Location of the cable
114.
Location of the cable
114.
Location of the cable
114.
Location of the cable
114.
Location of the cable
114.
Location of the cable
114.
Location of the cable
114.