Repair; Introduction - ABB DressPack IRB6650S Product Manual

4 Repair

4.1 Introduction

Structure of this chapter
This chapter describes all repair activities recommended for the
DressPack/SpotPack IRB6650S and any external unit.
It is made up of separate procedures, each describing a specific repair activity.
Each procedure contains all the information required to perform the activity, for
example spare parts numbers, required special tools, and materials.
Required equipment
The details of the equipment required to perform a specific repair activity are listed
in the respective procedures.
The details of equipment are also available in different lists in the chapter
information on page
Safety information
There are general safety information and specific safety information. The specific
safety information describes the danger and safety risks while performing specific
steps in a procedure. Make sure to read through the chapter
before commencing any service work.
Product manual - DressPack/SpotPack IRB 6650S
3HAC055424-001 Revision: C
WARNING
Repair activities not described in this chapter must only be carried out by ABB.
Otherwise damage to the mechanics and electronics may occur.
349.
Note
If the DressPack/SpotPack IRB6650S is connected to power, always make sure
that the DressPack/SpotPack IRB6650S is connected to earth before starting
any repair work.
For more information see:
• Product manual - IRC5
© Copyright 2004-2018 ABB. All rights reserved.
4 Repair
4.1 Introduction
Reference
Safety on page 15
229